 NSi
FireStop Systems include;
Intumescent, silicone, mortar, mineral wool,
pillows, Box Guards and putty sticks and pads.
** Please note
these products
are Ground Shipped Only **
|
 Air Circulator
AirKing
Aladdin Light Lift
Bath Fans
Circuit Breaker
Electrical Tape
Electric Heaters
Fire Stop
Floor Box
Generator Transfer
Hand Dryers
Hand Held Radios
Hand Tools
Humidifiers
Intermatic
Lighting Ballast
Lighting Fixtures
Lutron Dimmers
Motor Control
Nylon Ties
Pass and Seymour
Phone Alert
RAB
Range hoods
Roof De-Icer
Smoke Alarms
Surge Protection
Timers
Warm Tiles
Wiremold
Wire Nuts |
|
FireBlock136 Residential
Fire Block |
 Nsi FireBlock136 fire Blocking caulk is a single component, non
combustible material for residential applications. Colored Red for
easy inspection, FireBlock136 creates and effective barrier against
flames, smoke, and toxic gasses and has superior adhesion and gun
ability. Fire Block 136 is for use in annular spaces around wires
and pipes, ducts, vents and other penetrating items at ceiling and
floor openings; and room to room in wood and steel frame
constructions.FireBlock136 exceeds ASTM E136 standards for
fire blocking residential requirements prescribed by all major-model
building codes, and also meets or exceeds requirements of UBC, BOCA,
SBC, IRC, NYS and MA codes. FireBlock136 meets UL 1479 and ASTM-E814
standards.
** Please note
these products
are Ground Shipped Only **
|
| Cat
# |
Description |
Spec's |
Quantity
Discount |
Purchase |
| FS-136 |
10.3 fl. oz. cartridge |
View |
1-11 $6.35 |
12+ $5.75 |
|
|
FireStop814 Residential and
Commercial Fire stop |
 Nsi FireStop814 fire stopping caulk is a single component, non
combustible, non-intumescent material for residential and commercial
applications. Colored Red for easy inspection, FireStop814 creates
and effective barrier against flames, smoke, and toxic gasses and
has superior adhesion and gunnability. FireStop814 is for use in
annular spaces around wires and pipes, in one and two hour fire
rated assemblies. It restores the integrity of firestops in
residential and commercial construction. FireStop814 meets UL
1479 and ASTM E814 standards.
** Please note
these products
are Ground Shipped Only **
|
| Cat
# |
Description |
Spec's |
Quantity
Discount |
Purchase |
| FS-814 |
10.3 fl. oz. cartridge |
View |
1-11 $9.86 |
12+ $8.95 |
|
|
FireStop Box Guards |
NSi
FireStop Box Guards are one component fire rated pads made of highly
intumescent firestop material for use in electrical boxes. They are
inserted in the box and adhere to the inside back wall. NSi FireStop
Box Guards are easy to install and very cost effective. When exposed
to fire they expand, forming a char that will seal off the opening,
prevent the spread of fire and limit the temperature rise on the
unexposed surfaces. When used as directed, the horizontal separation
between outlet boxes on opposite sides of the wall may be less than
24 inches, provided that the boxes are not back-to-back. NSi
FireStop Box Guards are classified by UL under Wall
Opening Protective Material as found in the Fire Resistance
Directory. Available in two sizes to suit single and double boxes.
STC Rating 55.
View Spec's Here
** Please note
these products
are Ground Shipped Only ** |
| Cat
# |
Description |
Quantity
Discount |
Purchase |
| FSBG-1 |
Single Gang Box Insert |
1-24 $6.99 |
25+ $6.28 |
|
| FSBG-2 |
Double Gang Box Insert |
1-24 $8.28 |
25+ $7.65 |
|
|
Fire Stop Intumescent Caulk |
 Intumescent Caulk is water based, single component elastomeric
sealant intended for use as a fire stop system component. It forms
an economical yet durable, flexible and watertight bond with most
construction materials. It is applied independently for "caulk and
walk" systems or over mineral wool or backer rod to seal the
openings where building services such as pipes and cables penetrate
fire rated assemblies. Will not crack or crumble as the physical
properties remain stable over time. it tolls easily and cleans up
with water. may be applied by caulking gun or trowel.
ASTM E 814 and UL 1479 View Spec's Here
** Please note
these products
are Ground Shipped Only ** |
| Cat
# |
Description |
Quantity
Discount |
Purchase |
| FSIC-10 |
10.3 fl. oz. cartridge |
1-11 $15.37 |
12+ $14.18 |
|
|
Fire Rated Putty Sticks and
Putty Pads |
FIRE RATED PUTTY STICKS
AND
PUTTY PADS
NSi Fire Rated
Putty is a moldable non-curing, one-component fire rated material
for through penetration fire stop systems. In the event of a fire,
NSi Putty will expand when exposed to fire, forming an insulating
char, which prevents the spread of flames, smoke, gas and water
through penetration openings. Installation is easy as there are no
additives, there is no mixing and no curing time is required. The
putty is applied by hand and adheres to all common building
surfaces. NSi Putty can be installed in confined or occupied spaces
since there are no volatile solvents or asbestos fillers.
NSi Putty systems are rated up to 3 hours in accordance
with ASTM E 814, UL 1479 and ULC/CAN4-S1 1 5-M standards. NSi Fire
Rated Putty is available in sticks or pads.
View Spec's
** Please note
these products
are Ground Shipped Only ** |
| Cat
# |
Description |
Quantity
Discount |
Purchase |
| FSPS |
1-1/2" x 10" putty Sticks |
1-11 $29.70 |
12+ $26.46 |
|
| FSPP-1 |
6"
x 7" putty pads |
1-19 $7.09 |
20+ $6.37 |
|
| FSPP-2 |
7"
x 7" putty pads |
1-19 $8.49 |
20+ $8.27 |
|
|
FireStop Pillows |
 NSi
FireStop Pillows are a single step firestop system component.
They are intended for wall and or floor openings through fire separations
where temporary or permanent firestops are required. They
are ideal where cable retrofitting is frequent and anticipated.
These
pillows allow for quick and clean single product installation.
Pillows
are self-supporting no wire lath or mesh is required. They are to
be packed tightly into the voids between penetrating items and the
perimeter of the opening. During a fire, the intumescent component
within each pillow dramatically exPass and Seymourto seal the opening
from fire, thereby maintaining the integrity of the fire separation.
NSi Fire Stop Pillows consist of an intumescent layer sandwiched
between non combustible insulation, all enclosed in a hermetically
sealed polyethylene shell. No sealant or putty is required. Easy to
install, easy to remove and a quick and clean installation. ASTM E
814 and UL 1479.
View Spec's Here
** Please note
these products
are Ground Shipped Only ** |
| Cat
# |
Description |
Quantity
Discount |
Purchase |
| FSP |
FireStop Pillow in 2" x 4" x 8" |
1-24 $15.37 |
25+ $14.61 |
|
|
FireStop Mineral Wool |
 NSi FireStop Mineral Wool is a pre-formed, non-combustible miner-al
wool insulation. It is a semi-rigid combination of basaltic mineral
wool and proprietary binders. The mineral wool is pre-cut into various
widths and depths in 48 inch lengths for ease of handling and
immediate installation. It is intended for use as a firestop system
component and forming material in tested firestop systems and
designs. It is friction fitted into openings, joints, gaps, spaces
and
voids in fire rated assemblies. It is usually used in con junction
with
firestop sealant products such as Silicone, Silicone SL and
Intumescent Caulk.
Install NSi FireStop Mineral Wool to the minimum 25% to 33%
compression
required by the tested firestop system. Compression must always be
perpendicular to
the grain. Butt adjacent sections of NSi FireStop Mineral Wool
tightly against each other. Leave
no voids. NSi FireStop Mineral Wool is the recommended backing
material for NSi FireStop
Silicone, Silicone SL and Intumescent Caulk. Determine the depth of
firestop sealant required and
recess the mineral wool to the appropriate depth.
** Please note
these products
are Ground Shipped Only ** |
| Cat
# |
Description |
Spec's |
Quantity
Discount |
Purchase |
| FSMW |
Mineral
Wool in 25 lb. bags |
View |
1-4 $109.16 |
5+ $103.55 |
|
|
View Technical
Information Here |
| Click
on Pictures for Pricing |
|
|
|
|
