|
Din Rail terminal blocks |
 Din
Rail
Made from 35 mm un plated 6061 -T6 Aluminum alloy
providing for a strong, lightweight rail for mounting sockets,
terminal blocks or other electro-mechanical devices. Comes supplied
with oval holes 1.1 cm, approximately x .4 cm apart. Standard 10 mm
height allows for ease of installation vs. traditional 7.5 mm
height.
|
Cat # |
Description |
Quantity Discount |
Purchase |
| DR3910 |
Din-Rail sections are 39.3 Inches Long |
1-9 $10.00 |
10+ 1-25 $9.50 |
|
|
|
Din-Rail Mounted Modular
Terminal Blocks are very cost effective and intelligent solution to
connecting and terminating a wide variety of sizes and styles of
wiring in a neat and professional manner. Individual blocks can
easily be inserted or removed without disturbing adjacent blocks.
Insertion is made simply by snapping the block in place by hand.
Only a screwdriver is needed for removal. The mounting rail is
simply fastened by screws to the mounting surface. No special
brackets or hardware are needed. The design of all component pieces
is such that they may be mixed in a assembly. The blocks form their
own barriers. |
 |
This 25 Amp 600 volt Terminal Block will
accept #22 to two #12 wires per terminal and include captive wire
clamps for use with stranded or solid wire or ring terminals. Flat
top marking with either pen or stick-on labels. |
| Cat # |
Description |
Quantity Discount |
Purchase |
| DRTB25F |
25A Block |
1-25 $2.59 |
26+ $2.46 |
|
 |
This 50 Amp 600 volt Terminal Block uses a box
type connector to accept up to a #8 stranded wire. Requires only
3/8" per point, allowing 32 points per foot. Provides 3/8" square
marking area. |
| Cat # |
Description |
Quantity Discount |
Purchase |
| DRTB50 |
50A Block |
1-25 $5.73 |
26+ $5.44 |
|
 |
Single Pole Disconnect
The DRD Series of Disconnect Blocks may be
used in a single-pole function or linked together with other
disconnects to form multiple pole assemblies. Rated 15 Amps per
Pole, Accepts #22 to two #12 wires per terminal. |
| Cat # |
Description |
Quantity Discount |
Purchase |
| DRDTB-1 |
1 Pole Disconnect |
1-25 $11.22 |
26+ $10.65 |
|
 |
Double Pole Disconnect
Two single pole disconnects with an
interlocked handle so that operation on any pole operates all poles.
This unique assembly makes it possible to interlock the isolation of
different control panel functions without using expensive relays or
cam switches. Rated 15 Amps per Pole, Accepts #22 to two #12 wires
per terminal. |
| Cat # |
Description |
Quantity Discount |
Purchase |
| DRDTB-2 |
2 Pole Disconnect |
1-25 $22.37 |
26+ $21.25 |
|
 |
Three Pole Disconnect
Three single pole disconnects with an
interlocked handle. Rated 15 Amps per Pole, Accepts #22 to two #12
wires per terminal. |
| Cat # |
Description |
Quantity Discount |
Purchase |
| DRDTB-3 |
3 Pole Disconnect |
1-25 $36.47 |
26+ $34.65 |
|
 |
This Fuse Block
accepts 13/32 dia. by 1-1/2" long cartridge fuses through 25 amps,
600 volts. |
| Cat # |
Description |
Quantity Discount |
Purchase |
| DRFTB |
Fuse Block |
1-25 $13.37 |
26+ $12.71 |
|
 |
Cat # |
Description |
Cost |
Purchase |
| FTBFP |
Fuse Puller |
$2.59 |
|
 |
Each assembly of terminal blocks require end
barriers on each end to hold the terminals from moving or shifting
on the Din Rail |
| Cat # |
Description |
Quantity Discount |
Purchase |
| DREB |
End Barrier |
1-25 $2.84 |
26+ $2.71 |
|
 |
Jumper strap from one point to another on 25
amp terminal blocks. |
| Cat # |
Description |
Quantity Discount |
Purchase |
| DRJS2 |
Jumper |
1-25 $0.83 |
26+ $0.79 |
|
| More Products from NSI, Click on Pictures for Pricing
|
